Air Testing & Design, Inc.

since 1985

 

WHO WE ARE . . . . AND WHAT WE DO

 

The company’s main business focus is the design, development, testing, manufacturing and sales of superior air-related products, employing high-end ultraviolet technologies with primary focus on clean UV ozone generation, and germicidal sanitation equipment along with proprietary designed nitrogen oil well injection equipment and clean oxygen generators.

 

MADE IN USA – assembled in the USA. Some of our components are made throughout the world because, for certain parts, US makers could not produce to our specific specifications. We pay more for our proprietary manufactured components resulting in higher quality products and performance.

 

1987 – CATASTROPHIC EXPERIENCE THAT REVOLUTIONIZED

THE CLEAN OZONE IN AIR INDUSTRY

 

Mr. Molleker remembers the year 1987 because he recalls receiving a 5-year old ozone generator for reconditioning. It was his decision to be present to observe the condition of the unit.  The gold-plated corona discharge apparatus was extremely encrusted with a dirty rust-brown gunk.  He decided to remove the part to either clean or recondition it, or replace the part.  Because Mr. Molleker made it his policy to be personally involved, he adheres to one very stringent rule: always wear chemical-resistant gloves for protection when working on used ozone-spark generators. However, while examining this particular apparatus, he made the mistake that revolutionized, worldwide, the clean ozone in ambient air. He removed one glove in order to reach a hard-to-loosen fastener - and that is when it happened.

 

While reaching under the ozone-spark generator unit, the back of his hand brushed against a large buildup of light brownish gunk. The immediate pain was shockingly excruciating and the pain was indescribable. Mr. Molleker quickly realized that he had just exposed his hand to an accumulation of concentrated nitric acid, one of the most potent acids known to man.  For a more detailed description of this encounter, read the result on pages 139-141 of his book, “The Epidemic of the 21st Century - the Sick Home Syndrome - the Medallion Solution.”

 

Mr. Molleker vowed that what had happened to him should not happen to anyone else.

 

NEWSLETTER OF THE INTERNATIONAL OZONE ASSOCIATION – OZONE NEWS – VOLUME 37, NO 1 – JANUARY, 2009

 

*    *    *    ADDITIONAL SAFETY AND HEALTH HAZARDS    *    *    *

 

“The presence of nitrogen and oxygen in the corona discharge leads to the formation of small amounts of nitrogen oxides, mainly nitrogen pentoxide (N2O5) and nitrogen dioxide (NO2). N2O5 is a yellowish white solid that sublimes at 50oF, forming a reddish brown liquid. In contact with moisture in the feed gas, or in the event that the ozone generator is opened for maintenance, N2O5 forms highly corrosive nitric acid (HNO3).”

 

NEWSLETTER OF THE INTERNATIONAL OZONE ASSOCIATION – OZONE NEWS – VOLUME 37, NO. 6 – DECEMBER, 2009

 

“All ozone generators, other than UV generators, form dinitrogen pentoxicide (N205) when producing ozone. In dry conditions (e.g., dew point temperature better than -60°C), N205 exists as a solid residue. In “wet” conditions, N205 and H20 form nitric acid. Ozone generators must be opened, dielectrics removed and dielectrics and tubes cleaned when levels of nitric acid formation lower operating efficiency or cause blown fuses or dielectric damage.”

 

That was the day that brought about the revolution in the production and manufacturing of clean ozone from ambient air that surrounds us.  In this application, the term clean denotes ozone free of harmful toxic residues.  Ultraviolet light came to the forefront with the goal being clean ozone in air production without producing the harmful residues (by-products) when using the spark method.

 

As a consequence of a life-changing experience with unclean ozone, the company founder, Dan Molleker, created and tested various approaches of products, including the then popular spark methods of producing ozone. This particular method of ozone production has been used for over 100 years for sewage and water treatment where the nitric oxide residues are not as detrimental as for ozone in air treatment. During the research and development stage, various materials were used such as metals, along with glass, ceramics, electromagnetics and plasma. Unfortunately, these methods of producing ozone are still in use today. Moreover, they still produce the hazardous by-product, nitric oxide family. In the primitive methods of producing ozone from the ambient air surrounding us, some methods also add a pure oxygen process in order to produce cleaner ozone. However, this can be extremely dangerous with the spark method and was not acceptable to Mr. Molleker. In his own words, Mr. Molleker says, “When it’s your own blood smeared on your product and the tools you are using, you quickly learn to build it better and safer.”

 

Mr. Molleker’s goal was to produce a special and superior clean grade of ozone by reducing and/or eliminating the toxic residues (by-products) created by these various other unsatisfactory, dangerous and hazardous methods that produce unclean ozone (due to the nitrogen oxide families’ production of nitric oxide as a by-product) while introducing contaminated unclean ozone into ambient air we breathe.  Ambient air is the atmosphere air we breathe and live in. The elements in the atmosphere that surrounds us are listed below.

 

ELEMENTS IN OUR ATMOSPHERE AND AMBIENT AIR

Elements

Symbol

Atomic Num.

Atomic Weight

Approx. %

Nitrogen

(N)

(7)

14.0067

78.084

Oxygen

(O)

(8)

15.9994

20.946

Argon

(AR)

(18)

39.948

0.934

Neon

(NE)

(10)

20.183

0.0018

Helium

(HE)

(2)

4.0026

0.000524

Krypton

(KR)

(36)

83.80

0.000114

Xenon

(XE)

(54)

131.30

0.0000087

Hydrogen

(H)

(1)

1.00797

0.00005

Nitrous Oxide

(N2º)

 

 

0.00005

Methane

(CH4)

 

 

0.0002

Carbon Dioxide

(Co²)

 

 

Nil

Ozone

(O²)

 

 

Nil

 

The problem that Mr. Molleker has overcome was in dealing with the other elements in Nature’s life-giving ambient air.  In the spark method process, nitrogen molecules are fractured. This is the same as lightning in the air in a storm; lightening fractures the nitrogen molecules, creating the by-product, nitrogen oxides, along with some ozone. (*See Additional Safety and Health Hazards.) The nitrogen oxides then fall to the ground as Nature’s ultimate gift, nitrogen fertilizer that makes things grow, while the ozone also falls and does its job cleansing the earth. The ozone is what gives us that pleasant, clean smell in the air after a thunderstorm.

 

Nitrogen oxides are toxic and when combined with moisture and humidity, nitrogen pentoxide (N2O5) becomes nitric acid (HNO3).  That was the dirty, rust colored light brownish gunk Mr. Molleker encountered with his hand that day.

 

In the process of sourcing available Ultraviolet lamps, it was soon discovered that what the company’s proprietary equipment and the specifications required simply did not exist anywhere in the world, and for that matter still don’t  The end result was that Air Testing & Design, Inc. designed the special lamps required. It took a year to engineer, design, manufacture, and test the first generation of these special UV lamps along with the ballasts to drive the lamps. Success was achieved in creating the first true, clean ozone in ambient air generator. 

 

The rest is history. The company not only achieved our goals, we far exceeded them. Presently, we have the 6th generation UV lamps for clean ozone in air applications.  The UV AT 987 UTHOP series high quality, high output clean ozone and germicidal lamps, with a specially designed ballast series to drive our lamps, plus a constant upgrading of all of our parts, materials and components assures that we are always staying a step ahead with state of the art clean ozone lamps – we set the standard. Our motto, Quality First assures the absolute best in the industry.

 

Our warranty covers our equipment for 5 years. Our lamps are warranted for 10,000 hours, with the exception of breakage.

 

We do not build our equipment cheaply. We use the best materials available and we build our equipment to perform and to last. Our equipment is built to operate 24/7. It is, by far, the best UV equipment for our required specifications in the world. The company is very proud that, since 1987 we have thousands of AT&DI clean ozone generators in use throughout the world. Many of our clean ozone generators run 24/7 and have over 50,000 hours in use without failure. Our warranty factor is a minimal .0025.

 

There is no record of any Air Testing & Design, Inc.’s clean ozone generators causing any harm, illness or death from the proper use of our equipment

 

Our worldwide  clean ozone licenses, who are licensed to manufacture and sell our equipment for local sales only, include Australia, Canada, China, England, Hungary, Korea, Mexico, the Netherlands, New Zealand, the Philippines, Taiwan, Saudi Arabia and South Africa.

 

The company’s EPA ozone equipment manufacturer’s number is 82301-WA-001. Our ETL control number 3021003 is certified to CSA C22.2 No. 224 confirms to UL 867. Australian number approvals are the most stringent in the world to obtain. The company is very proud that the equipment we manufacture meets or exceeds even these standards. Our Australian Approval numbers are Q 051945 and C-Tick N15079.

 

All equipment is available in 110/140 volt 60HZ: 220 volt 50 and 60 HZ and 230-240 volt 50 HZ

 

Lifetime Stainless Steel Cabinet Material and Design: Lifetime #304 stainless Steel (an alloy composition of chromium, nickel, carbon, manganese, silicon, phosphorus and sulfur) with interior special proprietary UV 987 precision cambered exoteric refractive grain surface finish to exponentially increase the ultraviolet light efficiency to assure the ultra high output of clean ozone and germicidal sanitation.

 

Precise precision calibrated matched air, flows with lamp output to assure ambient air and clean ozone balance for highest production and maintains transfer saturation ability of the clean ozone molecules throughout the air in the area where the application is performed.

 

The methodology the company developed, along with our clean UV ozone generators has resulted in over 300,000 homes and buildings having been successfully treated and saved countless people from sickness and illness due to airborne allergens, molds, yeasts, viruses, bacteria, smoke and cooking odors, people odors, pet odors, Volatile Organic Compounds (VOC’s) and any other nasty or harmful odors.

 

No one else can make these claims and/or statements. As new improved advances in our technology are made in the ozone in ambient air industry, rest assured that they will be passed on to our valued users to benefit the world.

 

THE BOOK

 

Air Testing & Design, Inc pioneered and developed the proprietary Methodology to cure the Sick Homes and Sick Buildings Syndrome. Our founder has authored the only book written about the benefits of clean ozone in air.

 

The Epidemic of the 21st Century

The Sick Home Syndrome

 The Medallion Solution

ISBN 0-738-83077-1

(Available at amazon.com)

Library of Congress number 00-1918656

 

A special Thank You is extended to the intelligentsia of the International Ozone community for their encouragement, patience and fortitude, and their perseverance in dealing with the many naysayers who said it could not be done.

 

 

A WORD OF CAUTION:   There are many sellers and manufacturers of ozone equipment throughout the world. Most are only interested in sales. For over 10 years, many have tried to either copy or reverse-engineer our proprietary clean ozone lamps and the housing in which they are contained. They have not been successful. That’s why our worldwide licensees, who demand the highest quality, and the very best product available, chose Air Testing & Design, Inc equipment.